防撞墻模具介紹的主要內容是模具大小以及使用原理，混凝土防撞墻模具屬于中型鋼模具之一，而單套防撞墻模板使用的年限可以達到5年左右，這就需要制作的模板結實耐用程度高了。
The main contents of the mould for the anti-collision wall are the size of the mould and the principle of its use. The mould for the concrete anti-collision wall is one of the medium-sized steel moulds, while the service life of the single set of the mould for the anti-collision Wall can reach about 5 years, this requires the template to be strong and durable.

混凝土防撞墻模具簡介是根據現有生產技術、設備，在較高的鋼模具生產技術平臺之上，進行二次創新，以獲得新的模具生產技術，從而推動企業發展。我廠不斷完善服務，這樣我們才能走的更遠，發展的更好，同時也為消費者提供優質的井體，保定建信用心服務每一位合作客戶。所以混凝土防撞墻的生產就非常方便了。
The introduction of concrete anti-collision Wall Mould is based on the existing production technology and equipment, on the higher steel mould production technology platform, to carry on the second innovation, in order to obtain the new mould production technology, thus to promote the development of enterprises. I plant constantly improve service, so that we can go further, the development of better, but also to provide consumers with high-quality wells, Baoding Yuda service every customer. So the production of concrete anti-collision wall is very convenient.
防撞墻模具是根據目前公路使用的各類防撞護欄模板而言，因為生產技術參差不齊，導致很多施工單位遇到的模板都是采用薄、小或者焊接技術不達標的出現。

Anti-collision Wall Mould is based on the various types of anti-collision guardrail formwork used in the current highway, because of the uneven production technology, resulting in many construction units encountered templates are using thin, small or welding technology is not up to standard.


在防撞護欄模具的制作上，講究的是根據施工條件定制不同長度的模板，比如有機械輔助的話，可以每米設置2米以上，這樣在連接的時候就減少了時間，而人工搬運的話，需要將模板長度定制在1.5米以下，這樣工人搬運才會方便。防撞護欄模板根據長度大小，上下的固定方式都相同，但是固定的拉桿數量不同，1米的防撞護欄鋼模具上下各一個拉桿，左右開螺絲孔，這樣每套之間可以對接，而長度超過2米的需要上下設置4個，這樣固定才會更加結實。In the manufacture of the mould for the anti-collision Guardrail, the emphasis is on customizing the templates of different lengths according to the construction conditions. For example, if there is mechanical assistance, it can be set at least 2 meters per meter, thus reducing the time when connecting, while manual handling, it is necessary to customize the length of the formwork below 1.5 meters so that the workers can carry it easily. The anti-collision Guardrail formwork is fixed in the same way up and down according to its length, but the number of fixed pull rods is different. The steel mould for the anti-collision Guardrail has one pull rod up and down, and the screw holes are left and right, so that each set can be butted, the length of more than 2 meters need to set up four, so that the fixed will be more solid.