|
|
|||||||||||||||||
超純水拋光樹脂MB-106UP
一、產品介紹
Tulsimer ® MB-106UP為階核子級拋光樹脂, 是由核子級強酸型陽離子Tulsimer ® T-46Li 及核子級強堿型陰離子 Tulsimer ® A-33OH 以1:2 體積比的劑量比例 , 預先混合的混床級離子交換樹脂,專門提供給超純水系統拋光用，具有的交換容量及優越的物理特性。適合用于電子產業 ，生產半導體及映像管產業，實驗室，激光，精儀器，**行業等需要超純水的行業，以及核電廠等使用。在全球我們有數十家 核電廠使用我們的拋光樹脂。
二、重要參數
|
|
Tulsimer ®T-46 (陽) |
Tulsimer ®A-33 (陰) |
|
型式(Type) |
強酸性陽離子交換樹脂 (Strong acid Cation exchange resin) |
強堿性陰離子交換樹脂 (Strong base Anion exchange resin) |
|
主體結構(Matrix Structure) |
苯乙烯(Cross linked polystyrene) |
苯乙烯(Cross linked polystyrene) |
|
功能基 (Functional Group) |
硫酸基(Sulfonic acid) |
4級胺(Quaternary ammonium Type I) |
|
物理性貭(Physical Form) |
球狀顆粒(Moist spherical beads) |
球狀顆粒(Moist spherical beads) |
|
離子型式(Ionic form supplied) |
氫(Hydrogen) |
氫氧(Hydroxide) |
|
粒徑范圍(U.S.mesh in wet) |
16 to 50 |
16 to 50 |
|
粒度范圍 (Particle Size) |
0.3 to 1.2 mm |
0.3 to 1.2 mm |
|
微粒含量(Fines Content) |
穿過US 50 Mesh小于0.5% (Less than 0.5% passing through 50 U.S.mesh) |
穿過US 50 Mesh小于0.5% (Less than 0.5% passing through 50 U.S.mesh) |
|
總交換容量 (Total Exch. Capacity) |
1.8 meq/ml minimum of 99% in hydrogen form |
1.0 meq/ml minimum of 90% in hydroxide form and less than 1% in chloride form |
|
PH范圍 (pH Range) |
0 to 14 |
0 to 14 |
|
允許溫度 (Temp. Stability) |
120°C |
60°C |
|
微粒含量(Fines Content) |
穿過US 50 Mesh小于0.5% (Less than 0.5% passing through 50 U.S.mesh) |
穿過US 50 Mesh小于0.5% (Less than 0.5% passing through 50 U.S.mesh) |
|
總交換容量 (Total Exch. Capacity) |
1.8 meq/ml minimum of 99% in hydrogen form |
1.0 meq/ml minimum of 90% in hydroxide form and less than 1% in chloride form |
|
PH范圍 (pH Range) |
0 to 14 |
0 to 14 |
|
允許溫度 (Temp. Stability) |
120°C |
60°C |
|
溶解率 (Solubility) |
Insoluble in all common solvents |
Insoluble in all common solvents |
|
溶出有機物(Organic leachable) |
Less than 0.2 mg KMNO4 per ml of wet resin |
Less than 0.2 mg KMNO4 per ml of wet resin |
|
密度Backwash settled density |
Approx.750 gm/liter |
Approx.750 gm/liter |
|
不純物(Impurities) |
Fe=50 ppm(max) |
Fe=50 ppm(max) |
|
|
Cu=50 ppm(max) |
Cu=50 ppm(max) |
|
|
Pb=50 ppm(max) |
Pb=50 ppm(max) |
|
球粒強度(Bead strength) |
Avg. not less than 300g/bead by Chatillon test (ASTM Standard) |
|
三、產品優勢
1、具有交換容量及優越的物理特性
2、在全球我們有數十家 核電廠使用我們的拋光樹脂
3、MB-106UP為階核子級拋光樹脂, 是由核子級強酸型陽離子
四、使用場景
適合用于電子產業 ，生產半導體及映像管產業
實驗室，激光，精儀器，**行業等需要超純水的行業
核電廠等使用
專門提供給超純水系統拋光用
|
